Remote controls

Digital control panel compatible with HUB Series

Volume adjustment, source selection and EQ (programmable)

Compatible with WPa series panels with audio connector, for sending audio and control signals over a single CAT5 cable or better

Styling designed in collaboration with Italdesign Giugiaro

Bluetooth® receiver in WPa wall panel format (standard UE).

Bluetooth® class 1 (range 25m), version V5.0. A2DP profile.

Balanced stereo Euroblock output dual-mono configurable.

PAIR button with blue LED activity indicator. This can be turned off in dark rooms so as not to disturb.

Easy device name configuration, PIN, stereo/mono output and other adjustments via the Ecler Bluetooth® Manager application for Windows devices.

External 24VDC power supply (WP24-PSU, optional), via terminal strip or via eMCONTROL1 power supply bus

GPO: to indicate that an A2DP audio connection is active (automatic priority management)

USB-C configuration port: not visible, behind the front cover. Easily accessed by removing only the front cover; it is not necessary to remove the device from the wall. USB-C cable not included

Desktop paging station based on touch screen and programmable UCP panels

Flexo type microphone included

Audio transport using Dante ™

EclerNet control device, with the ability to execute EclerNet projects on its internal engine, acting as a server and / or client of UCP panels

10 "capacitive touch screen

PoE power or by local power supply

Ethernet communication interface

Analog audio output (MIMO88 / 88SG / 1212SG compatible)

20 mechanical keys with integrated LED status indicator (paging zone selection management)

1 mechanical key with adjacent LED indicator (message activation, PAGE key)

Electronic ink display (shows paging zone names)

Gooseneck microphone, with standard XLR connector

Management of up to 16 paging zones

RJ45 connector for single CAT5 or higher cabling (point-to-point), including power, audio output signal (picked up by the microphone) and digital control bus between the HUB unit and the eMPAGE station

Connector for backup power supply (optional)

Two eMPAGE units, with different or equal priority levels, can work simultaneously on the same HUB zoner

4 zone selection keys

SELECT ALL, and PAGE keys

Selectable chime melody

Gooseneck microphone

Single European electrical box format, compatible with flush and surface installation (surface box supplied as standard)

Compatible with circular base installation box, with diameter ≥ 60 mm, from products with serial number equal to or greater than those specified in the previous chapter

Power over Ethernet (PoE) or optional external power supply, WP24-PSU model

Ethernet communication interface, RJ45 connector

128x128 pixels LCD display

Digital rotary control (encoder) + 4 programmable keys

MIMO4040DN matrix remote control functions: audio source selection, preset selection, volume / MUTE adjustment, equalization settings, etc. (depending on models, refer to this manual and the EclerNet Manager application manual)

Dante™ interface wall panel

PoE power or by local power supply

Ecler Double gang surface mount box included

1 zone paging station

PAGE key

“PAGE ACTIVE” trigger port (GPO), for its connection to external devices (NO/NC selectable)

Internal connections for a secure wiring

Gooseneck condenser microphone

Windscreen and connectors included (microphone cable not included)